Pile Cap Engineering Studio

Project Information

Project Title Project Number Client Engineer Design Basis Design Notes

Column / Pedestal and Cap Geometry

Column X Dimension (ft) Column Y Dimension (ft) Column Eccentricity X (ft) Column Eccentricity Y (ft) Cap Thickness (ft) Pile Embedment in Cap (in) Pile Overhang to Centerline (in) Cap Top Elevation (ft)

Pile Layout and Geotechnical Inputs

Number of Piles in X Number of Piles in Y Pile Spacing X (ft) Pile Spacing Y (ft) Pile Diameter (in) Pile Tip Elevation (ft) Ground Elevation (ft) Water Elevation (ft) Bearing Capacity (tons) Side Friction (tons) Compression Factor Uplift Factor Boring / Reference

Material Properties and Reduction Factors

Concrete Strength, f'c (ksi) Steel Yield Strength, fy (ksi) Concrete Unit Weight (kcf) Soil Unit Weight (kcf) Shear Reduction Factor, phi-v Flexure Reduction Factor, phi-m Bearing Reduction Factor, phi-b Concrete Cover (in)

Reinforcement and Detailing Preferences

Preferred X-Direction Bar Preferred Y-Direction Bar Primary Bottom Layer Direction Maximum Bar Spacing (in) Minimum Clear Spacing (in) Minimum Cover Requirement (in) Development Length Factor Maximum Clear Span for Local Bearing Spread (h multiplier)

Paste from Spreadsheet

Accepted columns: LoadCase, Factor, Fx, Fy, Fz, Mx, My

Header mapping and duplicate-ID checks run automatically.

Load Case Summary

Editable Table

Factored Load Cases

Load Case	Factor	Fx (k)	Fy (k)	Fz (k)	Mx (k-ft)	My (k-ft)	Notes

Global Summary

Analysis Overview

Selected Case

2D Pile Force Map

Run the design to generate the force map.

Method Transparency

Rigid-Cap Reaction Equations

Rigid-cap distribution equations will appear here.

Load Resultant

Eccentricity Visualization

Load resultant graphics will appear here.

Reaction Plot

Per-Pile Reaction Profile

Reaction profile chart will appear here.

Interactive Model

3D Pile Cap View

Run design to generate 3D model.

Geometry, pile reactions, load arrows, and governing critical sections update with the current data set.

Group Metrics

Pile Group Properties

Selected Load Case

Per-Pile Reaction Table

No reaction results yet.

Envelope

Pile Compression / Uplift Summary

No envelope results yet.

Pass / Fail

Design Status Board

Governing Cases

Check Register

Design checks appear after analysis.

Capacity Snapshot

Demand / Capacity Graphic

Demand / capacity bars will appear here.

Steel Layout

Reinforcement Summary Graphic

Reinforcement summary graphic will appear here.

Section Slicer and Demand Inspector

Slicer Load Case Slice Direction Contributing Side Extra Offset Beyond d_v (in) Average positive and negative sides

Demand Trace

Selected Slice Overlay

The force map overlay updates with the slicer settings.

Shear

One-Way Shear

One-way shear details will appear here.

Punching

Column and Pile Punching Shear

Punching shear details will appear here.

Flexure

Strip-Based Flexural Design

Flexural design details will appear here.

Detailing

Bar Layout, Spacing, Cover, and Development

Detailing checks will appear here.

Interface Stress

Column Bearing / Local Stress Check

Bearing checks will appear here.

Drawing Sheet A1

Plan View and Notes

Plan drawing will appear here.

Drawing Sheet A2

Sections and Reinforcement Layout

Section drawings will appear here.

Report has not been generated yet. Click Generate Report.